4x Timpano TPT-ST4 BLACK Tweeters + TPT-500.4 2 Ohms Compact 4 Channel Amplifier

Description

INCLUDES:
1x TPT-500.4 2 Ohms - Timpano Compact 4 Channel TPT500.4 Car Audio Amplifier
2x
TPT-ST4 BLACK ( Sold in Pairs ) Total of 4 Units
TPT-500.4 2 Ohms Description
Timpano Compact 4 Channel TPT500.4 Car Audio Amplifie
r
– 4x 125 Watts at 2 Ohms – Mini Stereo 12 volts Full Range Class D Amp Bridgeable
Small Footprint Technology!
Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.
COMPACT DESIGN:
Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 3.93″ depth x 5.02″ width x 2″ height
POWER:
This amplifier is designed to run your stereo system with the power it needs to perform! 500 Watts maximum dynamic RMS power output of 4x 125 Watts at 2 Ohms per channel. Its high efficiency rate of 87% provides more power with less battery consumption.
BRIDGEABLE:
Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 225 Watts RMS
TECHNOLOGY:
A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 24,000Hz was used to give the best sound reproduction on this tiny amplifier.
FEATURES:
Heavy Duty 10 Gauge power and speaker wire Inputs. Built-in crossover filters for easy tuning! Choose between a fixed HPF at 90Hz or LPF at 90Hz + 45Hz Bass Boost or just turn it FLAT and use your external crossover or DSP settings. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.
Additional Information:
Number of Channels: 4
Max Dynamic Output: 4 x 125 Watts RMS 2 Ohms
RMS Power at 2 Ohms 12.6 Volts: 4x 100 Watts RMS
RMS Power at 4 Ohms 12.6 Volts: 4x 50 Watts RMS
Bridged RMS Power at 4 Ohms 12.6 Volts: 2x 200 Watts RMS
Supply Voltage: 10 ~ 15V
Frequency Response: 10Hz ~ 24KHz
Crossover Low Pass: Fixed at 90Hz + 45Hz bass boost
Crossover High Pass: Fixed at 90Hz
Signal to Noise: > 90 dB
Harmonic Distortion: < 0.9 % THD
Input Impedance: 20K Ohms
Impedance Output: 2 Ohms
Consumption with Signal Musical: 1A ~ 17A
Dimensions (L x W x H): 3.93” x 5.02” x 2”
Weight: 1.12 Lbs
Before Installing:
You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:
• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;
• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;
• Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity;
• To avoid damaging the cables, make sure that they do not touch sharp metal edges.Important: Use a fuse 12 inches away from the battery as a safety precaution
The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 1Khz with THD+N to ≤10% in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.
TPT-ST4 BLACK Tweeters Description
TPT-ST4 PRO Bullet 3.5″ Super Tweeter – 1″ Voice coil
These tweeters are capable of generating extremely loud volume you need to keep up in the high SPL environment. The aluminum diaphragm has been engineered to take the power needed to keep up and maintain crystal clarity.
Built In Crossover
– capacitor that eliminates out all low end frequencies that might otherwise harm the super tweeters.
Engineered and designed in the USA by PRV Audio Group, the ST4 is a high performance pair of 3.5-inch high compression titanium bullet tweeters that are rated at 250 watts max peak power. Ready to deliver major concert sound to your sound system.
Additional information
240 Watts Peak Each Tweeter
120 Watts Continuous Power each tweeter
60 Watts RMS Power each tweeter
Impedance: 4 Ohms
Sensitivity: 105 dB
Frequency Response: 2,000 Hz – 22,000 Hz
Aluminum Diaphragm
1″ CCAW Voice Coil
Weight: 1.41 Lbs (each)
Mounting Depth: 2.39″
Mounting Cutout Diameter: 2.79″
Overall Size: 3.75′ diameter x 2.81″ Height
Replacement Diaphragm: TPT-RPST4